模拟电路的模块级故障诊断

本文以多端口元件或子网络为基本单元，提出了一种模块级故障诊断方案，这种方案的故障模型更符合电路的实际情况，因而具有更广泛的实际意义，文中首先推导了模块故障诊断议程，并对模块故障可测性问题进行了一般性讨论。然后，给出了模块故障可测的几个拓扑条件，并通过定义广义独立通路使这些拓扑条件适用于一般的非互易网络。     

膜萃取器设计及应用研究进展

简要阐述了膜萃取的特点和基本类型;重点介绍了轴对称、纤维、片状等３种膜器的设计原理、特征以及膜过程设计．总结了膜萃取技术在金属离子分离、旋光化合物的分离、发酵萃取、医药萃取等方面的应用现状和最新进展;展望了膜萃取技术的发展趋势。     

Modeling Temperature in Coupled Electrical and Thermal Simulations of the Electroconsolidation® Process

Electroconsolidation® is a process for densifying complex-shaped parts by using electrically conductive particulate solids as a pressure-transmitting medium. The part is immersed in a bed of the particulate medium contained in a die chamber. Sintering temperature is achieved by resistive heating of the medium while applying compaction pressure. The process is capable of ultrahigh temperatures and short cycle times and offers the potential for low processing costs.

Control of the process and selection of process conditions require knowledge of the temperatures within the die. Temperature gradients exist because of the high heating rate and because of variations of density and electrical resistivity of the medium due to the presence of the part. Direct measurement of temperature with thermocouples or other conventional means is impractical because of the high temperatures, high currents, and high pressures that are involved. Therefore, a computer model was developed to predict temperature as a function of time and applied voltage for any location in the die. The computer model is composed of three parts: a geometrical model to approximate the density and resistivity variations in the medium, a finite-element model to calculate the rate of resistive heating within each element, and a finite-difference model to calculate the temperature distribution based on solution of the heat-transfer equations. Predicted temperatures have been shown to be in excellent agreement with measurements, and numerical simulation provided encouraging consistency and reasonably accurate predictions of temperature profiles within the die. The model demonstrated the feasibility of a new process to achieve simultaneous application of pressure and heat to powder densification in Electroconsolidation.     

基于AutoCAD2000的图解法确定工艺转角

提出了基于AutoCAD2 0 0 0的图解法求解机械加工过程中工艺转角的问题 ,并针对具体的应用实例给出了圆满的解答 ,并验证了其精度。     

十三陵蓄能电站上水库自动监测系统的设计及运行

由于十三陵蓄能电站上水库地处蟒山之巅，所在山体地质条件复杂。施工期埋设了大量的监测仪器，原有人工监测系统效率低、资料分析的同步性差。2002年5月，对其进行了自动化改造，现已有一套符合其特点的自动化监测系统。十三陵上水库水工建筑自动监测系统已正常运行了三年，同时也存在着问题，有待于进一步的探讨和改进。     

桃林口水库大坝人工监测项目管理软件的开发与应用

介绍了桃林口水库大坝人工监测项目管理软件研制的意义。对软件结构、开发环境、基本计算原理、主要功能进行了详细阐述；并以大坝垂直位移分析为例,详细讲述了回归分析在资料分析中的具体应用。该软件的应用使工程管理水平上了一个新台阶。     

工程管理信息系统的设计与实现技巧探讨

通过实例,对管理信息系统的功能模块、关系数据库进行了分析、设计和实现,并总结了其实现过程中的有关技巧。     

橇装式模块化注聚合物站的设计

针对以往固定式注聚站建设和运行所存在的问题 ,成功设计了橇装式模块化注聚合物站 ,将注聚合物工艺所需的地面设备和装置均以橇装形式集中于 6～ 7个橇块 ,实现了注聚站的模块化、整体快速搬迁和现场快速连接施工 ,有利于设备运行、管理和阶段移动配注作业。对装置的基本流程和配置 ,以及基本参数的确定做了详细阐述。现场应用情况表明 ,该注聚站完全满足注聚合物工艺要求。与常规注聚站相比 ,不但造价降低 ,而且在减少现场作业量及设备再利用等方面有了明显的改善     

PV module dynamic impedance and its voltage and frequency dependencies

The paper presents a derivation of the dynamic impedance of a PV module. At each bias voltage, the general form of the impedance describes a semicircular locus in the complex impedance plane. Intercepts of each impedance locus yield series, shunt and dynamic resistance of a module. Determinations of the dynamic impedance of a x-Si PV module in the dark with five reverse bias voltages and over a frequency range of 1 Hz to 60 kHz are made. The experimental results validate the derived general form of dynamic impedance.     

油田开发规划优化决策系统研究

介绍了油田开发规划优化系统的原理与方法、系统结构与模块功能设计。在产油量最大、总成本最低、效益最优等不同优化目标下，实现了数据导入、系统配置、油田开发动态预测、规划优化、产量分配、最优控制等效益规划功能。该系统已应用于油田中长远开发规划，取得了较好效果。